MULTILAYER

Multi-layer coatings for floors are made by the application of various epoxy resin levelling coats mixed with quartz sand in the appropriate grain-size curve by spatula or trowel.
Despite their reduced thickness, they provide extremely high performance without requiring any adaptation work to doors or existing systems. This system provides coatings for industrial flooring with elevated chemical resistance, impermeability to oil and other corrosive agents, resistance to frequent washing and the wear caused by lift trucks and moving vehicles, and even a reliable non-slip surface. These floors also bestow a good aesthetic effect.

Stratigraphy

  • Width: at least 1,5 mm (under the rule)
  • Undercoat type: concrete, gres, klinker, sand-cement.
  • Undercoat preparation: shot peening/grinding
  • Mechanical resistances: medium-high

Fields of use

Coating of industrial flooring with medium and heavy traffic like warehouses, storage areas, garages and covered parking areas, productive sites where forklift and AGV traffic is strong, laboratories and supermarkets.

  • chemical and pharmaceutical industries, in processing and storage areas;
  • food production industries, in product production and storage areas, also on surfaces where the traffic is medium-heavy and areas where there is a lot of processing water;
  • mechanized warehouses, in every area;
  • commercial centres, in areas with intense pedestrian transit and heavy handling wheeled traffic;
  • mechanical industries, car repair shops, heavy machining, in every area;
  • aseptic rooms, in storage areas and where non-slip effect is needed;
  • sterile rooms, laboratories and hospitals except hospital clean rooms and operating rooms.

Performance and advantages

Thanks to its high non-slip effect the multilayer coating is the perfect flooring for modern industry.

Multilayer floor guarantees the following characteristics:

  • A prestigious aesthetic look
  • Excellent non-slip power
  • Completely dust-free
  • Safe for the environment because it does not contain any solvents.
  • Long-lasting because it is characterised by a highly resistance to the wear and abrasion due to constant walking and frequent washing
  • Resistant to the majority of chemical agents like diluted acids, bases, oils and fuels
  • Thanks to its excellent mechanical characteristics, it is suitable for coatings in metalworking industries and car repair shops
  • Easily washable, sanitizable, decontaminable and therefore very indicated for the food industry, mainly in areas with heavy traffic, processing areas and where there is a lot of processing water.
  • It permits to obtain unbroken and level surfaces with an excellent aesthetic aspect and high functional characteristics.
  • It reduces operate times and consequently down times.
  • Excellent cost-performance ratio

Chemical resistances

  • Diluted mineral acids like: hydrochloric, nitric, phosphoric and sulphuric acid while its resistance is moderate to acids
  • Alkali, including sodium hydroxide at 50% concentration and detergents normally used for floor cleaning, even at 2030% concentrations, provided that they don’t contain any abrasive grains.
  • Sugars, also for frequent contacts;
  • Mineral oils, diesel fuel, kerosene and petrol.

Cleaning and maintenance

Regular cleaning and maintenance increase the durability of the treated floor, improve its aesthetic aspect and reduce the tendency to retain dirty. In general, the floorings made with this system are easily washable with neutral or alkaline detergents diluted in water in concentrations of 5 to 10%. Detergents and equipment for cleaning resin floors are easily available on the market. The manufacturers of these detergents can give complete information on how to proceed. Our Technical Support is at your disposal for any explanation.


CERAMIC MULTILAYER

WATER EPOXY MULTILAYER